7
Operation
7.1
Function lamp
The LubeTronic
5Point
is equipped with an LED function lamp (see
information in sections 5.1 "List of LubeTronic
and 6.3.1 "Daimler/standard wiring diagram (4-pin connector)" of
this manual). This function lamp indicates the status of the Lube-
Tronic
5Point
.
The following states are displayed:
A
The function lamp lights up for 3 seconds after “ignition on”.
Internal system check of LubeTronic
5Point
.
B
The function lamp does not light up during “normal opera-
tion”.
C
The function lamp lights up continuously. The grease supply
has run out and must be replenished.
D
If the function lamp is flashing, there is a malfunction or dam-
age to the LubeTronic
5Point
.
7.2
Switching on the system
The LubeTronic
5Point
is activated by the vehicle ignition. After
this, the LubeTronic
5Point
automatically dispenses grease at fixed
intervals (based on the selected lubrication rate, see section 6.3
7.3
Special lubrication
To activate special lubrication, the special lubrication feature must
be connected as described in section 6.3.5 "Connecting the Lube-
for special lubrication (optional)".
When you press the button for 3 seconds, grease will automatically
be dispensed 5 separate times over a period of approx. 20 minutes.
16
MUB 002 009 M01
(REV-B)
07-2020
LubeTronic
5Point