Joseph Enterprises The Clapper Plus Page 2 Manual Download

Page: 2 / 19

Congratulations!

You now have the convenience, flexi-

bility and security of The Clapper Plus. No other product

allows you to control your lights and appliances by sound

and RF (Radio Frequency) remote control.
With The Clapper Plus, you can turn on or off up to two

different appliances by clapping your hands. Clap two

times to operate one appliance and three times to operate

a different appliance. In addition to clapping, you can also

turn on or off your appliances by pressing the buttons on

the remote control.
The Clapper Plus also has a special AWAY mode. In

this mode almost any noise will turn on the connected

appliance(s) which can be used as a limited function security

device to discourage potential intruders. The AWAY mode

is also great for temporarily turning on lights when entering

a dark room such as a garage or basement. In this mode

there is no need to clap or press any button -- any noise will

turn on the lights!
For QUICK INSTRUCTIONS on operating your Clapper

Plus, please refer to the yellow Quick Tips card.

— 2 —

Summary of Contents for The Clapper Plus




















Search results

Summary of Contents for The Clapper Plus

Reviews:

Related manuals for The Clapper Plus

Brands by name

Popular brands

Joseph Enterprises The Clapper Plus, Manual

Search results

Summary of Contents for The Clapper Plus

Reviews:

Related manuals for The Clapper Plus

Brands by name

Popular brands