Jorvik JMT3, User Manual

Page: 24 / 32

Jorvik JMT3 Electric Mountain Trike
24
Safety
Helmet
Always wear an approved helmet while riding your Jorvik
Tricycle and follow the helmet manufacturer’s instructions
for fit, use and care of your helmet. It is your responsibility
to familiarise yourself with the laws of where your ride
your Jorvik trike and to comply with all applicable laws.
Mechanical Safety Check
Check the condition of your Jorvik trike before every ride.
Make sure no nuts, bolts or accessories are loose, with
particular attention to the front axle and handlebar stem.
Make sure that the tyres are correctly inflated with the
recommended air pressure that is located on the side wall
of very tyre. Check the brakes for proper operations.
You must take your trike in to be serviced and checked
by a qualified bike/trike mechanic after 100 miles (160
kilometres) of riding. This is a standard good practice for
any new trike as cables will stretch and components will
“break in”. The service must include spoke tensioning for
both front and rear wheels.