7
u
Put the ultrasonic gel on the probe top or on the patient’s skin.
u
Put the probe on the measurement area and move it slowly to locate the point where
maximum Doppler sounds are heard. The flat probe should be 90 degrees placed flat
on the animal’s skin over vessel.
u
Connect the headset when necessary. Headset can be used to listen to Doppler sounds.
It will cut off the MiniDop speaker to the room.
See Figure E
u
Depress the probe button again to turn the unit OFF. If the unit is left ON, the power
automatically shuts OFF in about 5 minutes.
See Figure F
Note: The auto-off time depends on room temperature.
u
If the power indicator becomes dark, replace the battery with a new one. Use a 9V
alkaline battery only.
See Figure G
Note: A non-alkaline battery may cause a short
Figure G
Figure E
Figure F
