16 Removing/Reattaching the Seat Pad for Washing
• To remove the seat pad, unlatch the buckle by pressing on the center button. See Figure 11.2.
• To remove the shoulder harness, turn the plastic ends sideways and push them through the slots in the seat pad. See Figure 11.1.
• The waist strap can be separated from the shoulder strap by sliding the waist buckle out. See Figure 16.1.
• Feed the buckle ends of the waist straps through the seat pad.
• Feed the buckle end of the crotch strap through the seat pad.
• Remove the seat pad.
• To reattach the seat pad, first lay the pad on the seat.
• Feed the buckle ends of the shoulder straps through the seat pad.
• Feed the buckle ends of the waist straps through the seat pad.
• Reattach the shoulder strap with the waist strap. See Figure 16.1.
• Feed the buckle end of the crotch strap through the seat pad.
17 Folding the Stroller
• Keep children away from stroller while folding.
• (OPTION 1) Remove seat for most compact fold.
• (OPTION 2) Keep seat attached:
• Close the canopy
• Remove or fold the bumper bar to its forward position.
• Fold the seat by pulling on the recline mechanism and pushing the seatback all the way forward. See Figure 17.1.
• Press the button on the right side of the stroller, below the handlebar. See Figure 17.2. While still holding the button, pull up on the triggers
found on both sides of the stroller. See Figure 17.3. Then push the handlebar all the way forward until the folding latch locks into place.
See Figure 17.4.
• Pull up on the handlebar to ensure the folding latch is secure.
!
WARNING
ALWAYS keep children away from the stroller when folding.
SATISFACTION GUARANTEED
We want you to be completely satisfied with your purchase of this product. Should you experience any
difficulty in assembling or using this product, or if you have any questions, please contact our Customer
Service Department at (877) 456-5049 between the hours of 8:30 am and 5:00 pm Central Time.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to ensure that they
are secured properly and not damaged or malfunctioning. The safety harness, as well as all other straps and fabric items and their stitching
should also be inspected periodically to ensure that they are secured properly and not loose, torn or otherwise damaged. All moving parts,
such as wheels, brakes, and hinges should also be checked periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only
original manufacturer’s components should be used. If needed, please contact Joovy at our toll-free phone number.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth. Always
allow the fabric to completely air dry before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or
other harsh environments. Use a sponge or cloth dampened with warm water and a mild detergent cleaner to clean the wheels after such use.
Please log onto
www.joovy.com
to register your new Joovy product.
