Joovy Carboose S, Instruction Manual

Page: 34 / 288

34
Car Seat Adapter (Britax/B.O.B. B-Safe) (Optional)
• To use the car seat adapter in the front position, first ensure the front seat is removed.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (96) Make sure the arrow mark on the adapter faces backward.
• Push down on each side of the car seat adapter until both brackets click into place. (97) Pull up
the car seat adapter on both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the bracket on
the car seat latches onto the car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up. (98)
• To remove the car seat adapter from the stroller, push the trigger on each adapter and pull it up off
the stroller. (99)
• To use the car seat adapter in the rear position, ensure the front seat is fully upright.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (100) Make sure the arrow mark on the adapter faces backward.
• Push down on each side of the infant car seat adapter until both brackets click into place. (101)
Pull up on the infant car seat adapter on both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, pull the release lever (the same lever used to release the car seat from its
base) and lift up. (98)
• To remove the adapter from the stroller, press the trigger on the adapter and pull it up off the
stroller. (99)
NOTE: The stroller can be folded with the car seat adapters when it’s installed in the front or rear
position.
I
WARNING:
For use ONLY on the Joovy Caboose S™
stroller. ALWAYS install the infant car seat so that the child is facing toward
the rear (handlebar) of the stroller. ALWAYS position the infant car seat so
that it securely snaps into the infant car seat adapters. The infant car seat
adapter is for use ONLY with specific infant car seats. DO NOT use other
infant car seat models that are not in the Car Seat Compatibility List (page
36). This product is not a toy. DO NOT allow children to play with it.