Bicycoo GT Instruction Manual
Page 4
Adjusting Balance Bike Seat
Check for the correct seat height by having your child
sit on the seat. Make sure your child’s feet touch the
ground and your child is able to walk. If necessary,
adjust the seat height in several steps in order to make
sure that your child is comfortable on the balance bike.
The correct seat height is essential for proper function.
Check and adjust the seat height periodically.
• Identify the seat clamp under the seat and loosen
the large hexagonal screw with the 5 mm Allen
wrench. See Figure 6.
• Raise/lower the seat to the desired height.
See Figure 7.
• Firmly tighten the large hexagonal screw.
• Push and pull on the seat to make sure it is secure.
Brake Adjustment
IMPORTANT NOTE: It is very important for the correct
operation of the hand brake that it be adjusted
properly. Through normal use, the cable may loosen
and require re-adjustment.
There are two adjustments for the rear brake, one on
the brake handle and one on the rear wheel.
• To adjust the brake handle, use a Phillips head
screwdriver to turn the screw clockwise to shorten
the handles travel. Turn the screw counterclockwise
to lengthen the handles travel. See Figure 8.
NOTE: Over tightening can cause the brake to
engage prematurely.
• The brake adjustment on the rear wheel tightens
the cable when you loosen the barrel adjuster. This
will engage the brake quicker. Loosen the lock nut
and turn the barrel adjuster counter clockwise.
Re-tighten the lock nut. See Figure 9.
Figure 6
Figure 8
Figure 7
Figure 9
!
WARNING
Make sure screw on seat clamp is
tightened securely.
