Bicycoo BMX Instruction Manual
REAR
FRONT
Page 3
Installing the Front Wheel and
Handlebar
• Keep children away while assembling.
• Insert the front fork and wheel middle tube into the
front steering hub of the bicycle frame so that the front
fork and wheel tube extends through the top of the
front steering hub. See Figure 2.
NOTE: Make sure that the pointed side of the front
fork and wheel support is pointed towards the rear of
the bicycle. See Figure 3.
• Install the handlebar by inserting the two handlebar
tubes into the two front fork and wheel tubes with the
pointed side facing the rear. See Figure 4.
• Identify the washer and place it into the hole in the
center of the handlebars (indentation down). See
Figure 5.
• Identify the hexagonal screw and screw it into the hole
in the center of the handlebars with the 5 mm Allen
wrench. See Figure 6.
• Pull on the handlebars to make sure they are secure.
Figure 2
Figure 3
Figure 5
Figure 4
Figure 6
!
WARNING
Make sure screw on handlebar is
tightened securely.
