Room
²
Ultralight Instruction Manual
Page 5
Page 6
Attaching/Removing the Mattress Sheet
5V[L!;OPZWYVK\J[JVTLZJVTWSL[L^P[OHJ\Z[VTÄ[TH[[YLZZZOLL[;V\ZL[OLZOLL[^P[O`V\YWSH`HYK
please follow the instructions below.
)LMVYLH[[HJOPUN[OLTH[[YLZZ[V[OLWSH`HYKZPTWS`Ä[[OLZOLL[V]LY[OLTH[[YLZZ^P[O[OLJVYULYZPUWSHJL
Then, feed the mattress straps with the snaps through the slots in the sheet and then through the slots on the
WSH`HYKÅVVY3VVW[OLZ[YHWZHYV\UK[OLIHZLMYHTL[\ILHUKZLJ\YL[OLZUHWHZKL[HPSLKPU-PN\YL
;VYLTV]L[OLTH[[YLZZZOLL[KL[HJO[OLZUHWZHUKMLLK[OLZ[YHWZ[OYV\NO[OLZSV[ZPU[OLÅVVYHUK[OL
sheet. Then, simply pull the sheet off of the mattress.
!
WARNING
Prevent possible strangulation or entanglement. Never use playard sheet
XQOHVVLWÀWVVHFXUHO\RQWKHSOD\DUGPDWWUHVV
Operation of the Quick Fold
NOTE: The quick fold mode allows you to fold the playard quickly and easily without completely
disassembling. You must remove the mattress sheet before using the quick fold.
• With the sheet removed, stand behind the back of the playard (the side with the solid wall). Reach inside
the opening in the center of the mattress and locate the black fabric handle.
7\SS\W^HYKZVU[OLISHJRMHIYPJOHUKSL653@[VSPM[[OLÅVVY)LZ\YL[OLOHUKSLPZW\SSLK\W^HYK
Z\MÄJPLU[S`[VYHPZL[OLÅVVY:LL-PN\YL
>P[O[OLJLU[LYVM[OLÅVVYW\SSLK\WSVJH[L[OLI\[[VUH[[OLV\[ZPKLJLU[LYVMVULVM[OLZPKL[VWYHPSZ
NOTE: The button is sewn inside the fabric near the center of each top rail. See Figure 12.
• Pull upward on the top rail and squeeze the button. Then push down on the top rail until the locking
mechanism is released on BOTH sides of the top rail. See Figure 13. NOTE: If the rail tubes do not
\USVJRKVUV[MVYJL[OLT3PM[[OLJLU[LYVM[OLÅVVYOPNOLYHUK[Y`HNHPU
• Once you have successfully released BOTH tubes and folded that top rail, repeat this procedure on the
opposite top rail until both of the side top rails have been folded.
• Pull the front of the playard towards you until the playard is folded in half. See Figure 14.
• Locate the male and female buckles on one side of the playard and fasten the buckles to secure the
playard together. See Figure 15. Repeat this procedure on the other side.
NOTE: DO NOT force the playard. If the unit will not fold, look for a partially latched top rail and push the
button in to release the rail.
