background image

English – 

5

SVENSKA

A

4. Hand guard

The guard is fitted in front
of the front handle (mod.
HT 2122 T and HT 2126
T) and has the purpose of
protecting the left hand
from injury, e.g. from twigs
and branches.

Model HT 2130 has a
similar guard.

Safety instructions

5.  Vibration damp-
     ing system

Your machine is equipped
with a vibration damping
system, which is designed to
give as vibration-free and
comfortable use as possible.

The machine‘s vibration
damping system reduces the
transfer of vibrations
between the engine unit/
cutting equipment and the
machine‘s handles.

6. Silencer

The silencer is designed to
give the lowest possible noise
level and to direct the
engine‘s exhaust fumes away
from the operator.

The engine‘s exhaust fumes
are hot and can contain
sparks, which can lead to the
outbreak of fire.
It is extremely important that the instructions for checking,
maintaining and servicing the silencer are followed. (See the
section "Control, maintenance and service of the machine's
safety equipment).

WARNING!

During use and for some time after the
silencer is very hot. Do not touch the
silencer if it is hot!

7. Clippers

Make sure that the clippers
are not damaged by cutting
steel wire, nails, or by
excessive force.

NOTE!

During transport and
storage the transport
guard should always
be fitted over the
clippers.

WARNING!

Over exposure to vibrations can result in
blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are "numbness", lack of
feeling, "tickling", "pricking", "pain", lack
of or a reduction in normal strength,
changes in the colour of the skin or its
surfaces. These symptoms normally
appear in the fingers, hands or wrists.

On Mod. HT 2122 T and
HT 2126 T the rear grip can
be turned to ensure a good
working position for the
hand, when for example
trimming the side of a
hedge.

NOTE!

Check that the nut (A)
is well tightened after
adjusting the grip.

ENGLISH

Summary of Contents for HT2122T

















Reviews: