40 – English
TECHNICAL DATA
RECOMMENDED CUTTING EQUIPMENT FOR CANADA
The following is a list of recommended cutting equipment for Class 1A and 1B Chainsaws. The combinations of
powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-95 Chainsaws and Z62.3-96 Chainsaw
Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent
or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or ”Type C Low-Kickback Saw Chains” which
are available at your dealer.
Bar and chain combinations
Note: For the saw chains above (if available) you are free to choose between 0,050" or 0,058" gauge drive links for the
corresponding bar, see the table below
Saw chain filing and file gauges
Bar
Chain
Length, inch
Pitch, inch
Thickness of drive
links, inch/mm
Max. nose radius
Type
Drive link count
13
0,325
1,3
10T
Jonsered H30
56
15
0,325
10T
64
16
0,325
10T
66
18
0,325
10T
72
13
0,325
1,5
10T
Jonsered H25
56
15
0,325
10T
64
16
0,325
10T
66
18
0,325
10T
72
20
0,325
12T
80
16
0,325
1,5
10T
Total NT 528PS
66
18
0,325
10T
72
0,050"/1,3 mm
H30
-
NT 520PS
0,058"/1,5 mm
-
H25
NT 528PS
