• If there is a cell leak, do not let the
liquid touch the skin or eyes. If you
have touched the liquid, clean the area
with a large quantity of water and get
medical aid.
• Do not use a charger other than what
is specified for operation with the
battery pack.
• Look at the plus (+) and minus (-)
marks on the cell, battery pack and
product to make sure of correct
operation.
• Do not use a battery pack not made for
operation with the product.
• Do not mix battery packs of a different
voltage or manufacturer in a device.
• Keep battery packs away from
children.
• Always purchase the correct battery
packs for the product.
• Keep battery packs clean and dry.
• Clean the battery pack terminals with a
clean dry cloth if they become dirty.
• Secondary battery packs must be
charged before use.
• Always use the correct charger and
refer to the manual for correct charging
instructions.
• Do not keep a battery pack on
continuous charge when not in
operation.
• Save the manual to refer to it in the
future.
• Only use the battery pack for its
necessary operation.
• Remove the battery pack from the
product when not in operation.
• When the battery pack is not in
operation, keep it away from other
metal objects, like paper clips, coins,
keys, nails, screws or other small metal
objects, that can make a connection
between terminals. Shorting the battery
pack terminals together can cause
burns or a fire.
OPERATION
a
WARNING
Read and understand the
safety chapter before you use the
product.
The display shows the battery pack
capacity and any problems with the
battery pack. The battery pack capacity
is shown for 5 seconds after the product
is turned off or the battery pack indicator
button is pressed. The red LED on the
battery pack comes on when an error
has occurred.
LED lights
Battery pack status
All Green LEDs come on
Fully Charged (100% - 76%)
LED 1, 2 and 3 come on
75% - 51% charged
LED 1 and 2 come on
50% - 26% charged
LED 1 comes on
25% - 6% charged
LED 1 flashes
5% - 0% charged
• Regularly examine the battery pack
charger and the battery pack for
damage or cracks.
• The battery pack must be charged
before using it the first time. The
battery pack is only 30% charged when
supplied.
• Put the battery pack in the battery pack
charger. Make sure that the battery
pack is connected to the battery pack
charger.
• The green charging light on the
charger comes on when the battery
pack is connected to the battery pack
charger.
• When all LEDs come on, the battery
pack is fully charged.
• Remove the battery pack from the
battery pack charger. Use the battery
pack in areas where the temperature is
between 32°F (0°C) and 104°F (40°C).
Note
When you charge the battery pack,
monitor the charging process and do not
keep the battery pack in the charger after
the charge is complete.
4