Jonsered 1250RZ Operator'S Manual Download

Page: 11 / 70

2.3. Boom system and add-on lifting accessories

The boom system consists of the following
components:

(1) 1st boom

(2) 2nd boom

(3) Hydraulic extensions

The length of the hydraulic extension depends on the type
of crane.

(4) Grapple

Add-on lifting accessorie is placed between the boom tip
and the load.

2.4. Stabiliser system

All our cranes are equipped with two stabiliser extensions
and two stabiliser legs. Auxiliary stabiliser systems may be
needed for heavy cranes.

• (1) Stabiliser beam. The stabiliser beam is a part of the

crane base.

• (2) Stabiliser extensions.
• (3) Stabiliser locking device.
• (4) Switch
• (5) Stabiliser leg.

2.5. Operating system - hydraulic components

The operating system consists of the following hydraulic components:

• oil tank
• hydraulic pump
• oil cooler [option on some cranes]
• main control valve
• stabiliser control valve
• hydraulic hoses and lines
• actuators:

first boom cylinder
second boom cylinder
extension cylinder/s
slewing cylinders

• return filter/oil tank
• pressure filter

⑤

Structure and parts of the crane

Jonsered 1250RZ -1500RZ R CE

Summary of Contents for 1250RZ







































































Search results

Summary of Contents for 1250RZ

Reviews:

Related manuals for 1250RZ

Brands by name

Popular brands

Jonsered 1250RZ, Operator'S Manual

Search results

Summary of Contents for 1250RZ

Reviews:

Related manuals for 1250RZ

Brands by name

Popular brands