Jonix 70WHMINIMATE4, Use And Maintenance Manual

Page: 14 / 64

14
JO NIX
minimate
a
288
184 87
10
1
55
0
29
8
before installation:
- check that under and above the device there
is sufficient space in order to allow the air to
flow.
- Make sure that the holes are aligned; in this
respect, follow the quotas mentioned in the
drawing to the side.
6.3 cHoosInG THe InsTallaTIon sITe
The right plugs for installation must be chosen based on the weight of the
appliance, shown in chap. " Technical data", and the type of wall it is installed on.
• Do not put the device in places where there are flammable gases, acidic, aggressive
and corrosive substances that can damage the various components beyond repair.
• Provide a minimum clearance, in order to install the device and carry out routine and
special maintenance.
Also a version of the device to be wall mounted is available.
The packed device is fixed on a pallet with some screws. Once brought to the installation site, it
has to be unscrewed from the pallet before proceeding with the installation.
Drill holes in the wall and insert the screw anchors into them.
Screw the screws allowing them to project 8-10 mm from
the wall. check that the device is stable before using it.
6.3.1 Guidelines for wall mounting
Fig. A: Open completely the frontal panel.
Get the appropriate tools to lift and unpack the device.
Holes for
wall
mounting:
Ø8 mm