TROUBLESHOOTING
ALWAYS UNPLUG THE MACHINE BEFORE
DISCONNECTING OR CONNECTING ANY WIRES OR
COMPONENTS
SYMPTOM
POSSIBLE CAUSE
Low pressure
Plugged or dirty inlet filter;
Pump is leaking
No spray
Solution tank is empty;
Quick couplings on solution line are not completely connected to machine or tool;
Spray tip(s) plugged;
Pump motor is not running
Plugged/dirty pump inlet filter;
Plugged or damaged solution hose or quick disconnect
Pump not
running
No power to pump -- no power to cord
On/off switch is bad;
Pump motor is getting power but won’t run – check motor brushes;
Low suction
Recovery tank lid not sealed;
Dirty vacuum inlet screen;
Vac hose loose or cracked;
Vacuum gasket is damaged or compressed
No suction
Recovery tank is full;
Vacuum is not running – bad switch or bad vacuum
Always use original equipment replacement parts.
Contact your distributor for additional information or to arrange for service.
7
Summary of Contents for Prospector PE120
Page 8: ...Prospector PE120 33 27...
