3. FUNCTION
The machine is designed for vacuuming and separating dry, non-combustible
dust with an explosion limit value of 0.1mg/m
3
.
The dust extractor is started by the switch. All the switches can operate independently.
Type
Models with Jet pulse filter cleaning
Red switch 2 step
0: Motor off, 1: Motor on
Dust-laden air is then sucked through the inlet valve at high speed via the suction hose.
The air is slowed down by the cyclone and coarse dust particles are separated out,
partly by centrifugal force and partly by gravity. Air and finer particles then pass through
the double filter system where separation is made. The machine is designed for filter
cleaning by reverse air pulse.
The separated dust accumulates in the cyclone until the machine is switched off, when it
drops through the bottom flap into the plastic bag. The filter cleaning process is not
completed before it is clear that the dust inside the tank has fallen down into the
collection bag. In some extreme cases the adhesive ability of the dust must be broken
manually. This can be done by hitting the dust through the bag or tapping the tank using
i.e. a rubber hammer.
4. HEIGHT ADJUSTMENT(Optional)
DDV36
WITH HEIGHT ADJUSTMENT SYSTEM:
Lifting operating:
Grip the 2 handles on barrel, lift to the
top
and then
loose the grip slowly.
Dropping operating:
Grip the 2 handles on barrel, lift to the top, hold for
one second, then drop it down to the bottom.
Lifting
Dropping
Notice
Before connecting the power, please confirm the voltage is consistent with the label on the machine.
Make sure the electric plug and socket are matching
Make sure the hose and inlet are matching
Connect the accessories and hose end
Notice
Turn on the machine until the motor stop working completely.
Please disconnect the plug when the machine doesn’t work.