Version OS 2.07
7.3. Note Commands
Split Mode 1 Split Mode 2 Split Mode 3 Split Mode 4 Split Mode 5
Note (Midi
Number)
C1(36)
C1(36)-
C2(48)
C2(48)-
C3(60)
C3(60)-
C4(72)
C1(36)-
C6(96)
7.4. System exclusive data
Since the sound control via Midi is entirely made with CC controllers, SysEx data are
only used for sending and receiving presets.
One line of system exclusive commands looks like the following:
$F0(SysEx Begin), $31(JoMoX Manufact. code), $7F(Command Sys Ex Dump),
$5e(Product Code), $XX(Preset No.),XX(Data0),XX(Data1),..., $F7(End of SysEx)
32 bytes [bit7...bit0] (0..255) of data per preset are transferred. They are split into
two 7-bit midi bytes: MSB [bit7] in Data0 and LSB [bit6...bit0] in Data1. The MSB
(most significant bit) is coded in Data0 = 1 or = 0, depending if bit 7 of the actual
byte was set or cleared.
The numbers and digits of Sys Ex sequences are shown, as always, in hexadecimal
numbers.
And finally...
Service, tips and tricks:
JoMoX GmbH
Sophie-Charlotten-Str. 15
14059 Berlin / Germany
We wish you lots of fun on creative usage of our products!
© 2020
Jürgen Michaelis
ModBase 09 MkII Operating Manual
29
