Jolly LX-740, User Manual, Page: 20 / 24

- 16 -
9.Maintance and cleaning
It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
through out its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circum stances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp and the fuse.
Replacing the fuse: If the lamp burns out,the fine-wire fuse of the device might fuse,too.Only replace the
fuse by a fuse of same type and rating.Before replacing the fuse,unplug mains lead.
Maintenance and maintenance of the operation, please contact the manufacturer or distributor.
DANGER:Disconnect from the mains before starting any maintenance work.
10.1 Electrical paramters
10.Electric equipment specification
SOURCE:
POWER:300
VOLTAGE:
RGBW LED-40W
W
AC100-240V 50/60HZ
Color Temperature:6500K
10.2 Weight and dimensions
Dimensions
：
250X165X336
NET WEIGHT:5.8Kg
Dimensions
WEIGHT
mm
（
Carton Package
）:
mm
(
Carton Package
):
Kg
445X360X270
7.2
10.3 Channel Characteristics
．
and netwo rk control mo de optional.
2
．
450 228 Fi xture could auto reset.
3
．
De mme r
:
lime ar dimme r.
5
．
Zo om: linear amp lifier.
。
6
．
Sh utter
:
electronic shutter
,
random strobe.
7．
Th e netwo rk control mo de and DMX control mo de have independent control and comb ined control.
1 22
、
16 two standard DMX channel mo del
Sc an
:
Pa n
°,
Tilt
°,