- 7 -
7.Display control
7.1 Navigation in the Menu
7.2 Display Operation
Using the buttons, and
this
can
be simply and easily set the address code and
function code.
If you view or
modify
the
lighting
feature
set
,
then
press
ENTER
button
,
the display
will
enter the
menu
interface
.
Both
there
is
sub menu corresponding to the functional operation of the main menu
.
Each of the
menus is
representative
of
the
specific
features of
the lamp
.
The specific
contents shows
as
the
table
menu
below
.
Set or browse lighting function, press UP or DOWN button.
Press ENTER to save your changes or enter the submenu
.
Press the UP or
DOWN can change the nume-
rical
(
increase
or
decrease
in
value).
Press the MODE button to return to menu
.
-
When the power on, if the display is flashing, it indicates that the DMX signal connection is unnormal.
-
Once powering on, the display indicates as following:
>
Main
DMX
>
Main
Personality
>
Main
Stand-Alone
>
Main
Service
>
Main
Information
menu interface
Main interface
CLIKE ENTER OF HOME PAGE TO SELECT:
Mode
DMXA
001
Std.12
DMX address code