Jolly D6-WP, User Manual

Page: 14 / 24

Click on the main interface of the icon, numerical to view view Settings related information of lamps and
lanterns.Symbols such as the main interface appear “ “,the following error message indicates that there
might be a lamps and lanterns,can click to view and control information content to modify the lamps and
lanterns.
- 10 -
CODE # ERRO INFO CHECK MEASURMENT NOTE
E01 SpiFlashError Check the welding of memory IC
E02 Program Err 1 Check the welding of Chip
E03 Program Err 2 Check the welding of master IC EP3C
E04 MBDInit Error
E05 BD1Init Error
E06 BD2Init Error
E12 BusErr1
E14 SPDError Check the welding of master IC
E16 MFpga Error
E17 BD1 BUS Error
E18 BD2 BUS Error
E21 Pan FB. Err
E23 Tilt FB. Err
E22 Pan Zero Err
E24 Tilt Zero Err
E37 B.Fan1 Error
E38 B.Fan2 Error
E40 L.Fan1 Error
E41 L.Fan2 Error
E45 EthMDL Error Check the fan of ArtNet、communication signal
Check the communication signal 485& 485 chip & memory
IC
Check the fan of head
Check cable of sensor, distance and location of ,magnets
and sensor
Check the light coupling line, optical coupling switch and a
plate of the relative position measurement
Check if the fan(61x15) of the lED holder is working
Check the communication signal& welding of
communication chip
Check main cable ABAB（485） chip
RESET
ERROR