10
CODE ERRO INFO
CHECK MEASURMENT
NOTE
E001
SpiFlashError Check the welding of memory IC
E002
Program Err 1 Check the welding of Chip
E003
Program Err 2 Check the welding of master IC EP3C
E005
BD1Init Error
E006
BD2Init Error
E007
BD3Init Error
E012
BusErr
Check main cable ABAB（485） chip
E014
SPDError
Check the welding of master IC
E017 BD1 BUS Error
E018 BD2 BUS Error
E019 BD3 BUS Error
E021
Pan FB. Err
E023
Tilt FB. Err
E022
Pan Zero Err
E024 Tilt Zero Err
E025
Prism Err1
E026
Prism Err2
E027
R.Gobo Err1
E028
R.Gobo Err2
E029
A.Gobo Err
E031
Zoom Err
E032
Focus Err
E033
St. Gobo Err
E034
ColourW. Err
E035
Iris Err
E036
Cyan Err
E037
Magenta Err
E038
Yellow Err
E039
CTO Err
E040
Frost Err
E042
B.Fan1 Error
E044
B.Fan2 Error
E053
L.Fan1 Error
E055
L.Fan2 Error
Check the fan of head
Check if the fan(80) of the lamp holder is working
Check the light coupling line, optical coupling switch and a plate of
the relative position measurement
Check cable of sensor, distance and location of ,magnets and sensor
RESET
ERROR
Check the communication signal 485& 485 chip & memory IC
Check the communication signal& welding of communication chip
*Click on the main menu of the icon and value to view set of the relevant lighting information. If there is
symbol of the " " on the display, it indicates that the device may be wrong , if the symbol was blue, the
contents are errors appeared, click to clear. When the symbol is yellow, you can click on the view and
according to the references information to modify, If there is any doubt, please consult the relevant
technical personnel. (-for details see attached table).