background image

35

36

4. Please make sure that the 

backrest of the child safety seat 
rests flat against the backrest of 
the car seat so that the child 
seat is under no circumstances 
in a reclined position. 

18

 

19

Pull the vehicle safety belt and 
pass through the belt path 

20

, and 

then buckle it up. 

20

 

-3

!

   

Position shoulder belt through  

    the shoulder belt guide shown  
    in 

20

 

-1

!

   

DO NOT position vehicle  

    belt over top of the armrests. It  
    must pass underneath the  
    armrests. 

20

 

-2

!

   

The lap belt must be low own on   

    hips. The child restraint is  
    shown as

 

20

 

 

!

   

The child restraint can not be  

    used if the vehicle safety belt  
    buckle (female buckle end) is    
    too long to anchor the child  
    restraint securely. 

20

 

-4

19

18

20

3

1

2

4

22

21

   !

   

To ensure the correct head 

support height is obtained,  
the bottom of the headrest 
MUST be even with the top 
of child’s shoulders as 
shown in 

21

 and the 

shoulder belt must be 
positioned in the red zone 
as shown in 

22

   !

   

Place a child restraint firmly 

against the back of a 
forward-facing vehicle seat 
equipped with a lap/
shoulder belt.

   !

   

Have your child sit in a child 

restraint with their back flat 
against back of a child 
restraint.

   !

   

NOT as shown in 

24

. Fasten 

buckle and pull up on the 

        shoulder belt to tighten.

   !

   

If the belt lays across child 

neck, head or face, readjust  
head support height.

   !

   

Belt must not be twisted.

23

24

Summary of Contents for Trillo LX


























Reviews: