Adjust Shoulder and waister Harnesses
see images Fig. 9 - Fig. 12
9
- 1 Shoulder harness anchor A
9
- 2 Shoulder harness anchor B
9
- 3 Slide adjuster
For larger child, use Shoulder harness anchor A and the highest shoulder slots.
For smaller child, use Shoulder harness anchor B and the lowest shoulder slots.
Choose a pair of proper shoulder slots, thread shoulder harnesses out off
previous slots
(Fig. 10)
, and then insert into desired slots in seat pad and
seat back.
(Fig. 11.1)(Fig. 11.2)
!
When changing shoulder harness slots, make sure shoulder harnesses
are going through same slots in seat pad and seat back.
Use slide adjuster to change the harness length
(Fig. 12.1)
,
press the button
(Fig. 12.2)
, while pulling the waist harness to proper length.
(Fig. 12.3)
Use Tray
see images Fig. 13 - Fig. 14
Sliding the tray along the tray bar to a proper position
(Fig. 13)
while pulling
the button under the tray outward
(Fig. 5.1)
.
The tray has 3 positions for adjustment.
(Fig. 14)
!
Ensure both sides of tray are in matching positions.
!
Pull tray backward to ensure both guides are secure.
Adjust Height for Seat
see image Fig. 15
1. There are 5 height positions. The seat can be adjusted to the proper
height according to the height of your dinner table, which makes it more
convenient for your child to have meals together with family.
!
DO NOT adjust the height of the seat with child in it.
2. To adjust height, press the height adjustment buttons on both sides of the
chair
(Fig. 15.1)
, and lower or raise seat to a desired position.
(Fig. 15.2)
23
24
2. Using the button on the back of the seat to open the highchair by rotating
the backrest upwards
(Fig. 4.1)(Fig. 4.2)
. a “click” means the backrest is
locked completely.
!
Please confirm the recline wire and seat latch slot are fully engaged
before use.
(Fig. 4.2)
!
If they are not correctly engaged, please fold the unit as
Fig. 17
and
repeat the above operation.
3. Please attach basket to the support leg by 4 pairs of webbings
(Fig. 4.3)
.
Pull webbings upwords to remove basket.
4. Place the tray over tray bar
(Fig. 5)
while pulling the button on both sides
under the tray outward
(Fig. 5.1)
until a “click” is heard.
The assembled highchair is shown as
Fig. 6
.
Use Highchair
Use Buckle
see images Fig. 7 - Fig. 8
Lock Buckle
Match the waist belt buckle with the shoulder buckle
(Fig. 7.1)
, and “click”
into the center buckle
(Fig. 7.2)
, a “click” means the buckle is locked
completely.
(Fig. 7.3)
Release Buckle
Press the center button to release the buckle.
(Fig. 8)
Note
1. To avoid serious injury from falling or sliding out, always secure your
child with harness.
2. Make sure your child is snugly secured, and that the space between
the child and the shoulder harness is about the thickness of one
hand.
3. DO NOT cross the shoulder belts. This will cause pressure on
child’s neck.
1. The shoulder harness must go into the slot that is even with or
slightly above the shoulders.
2. In order to protect your child from falling out, after your child is
placed into the seat, check whether the shoulder harnesses are at
proper height.
Note
Summary of Contents for snacker 2in1
