
joke
I n s t r u c t i o n M a n u a l F M M / 4 H a n d - f i l i n g m a c h i n e
10
Operation / use
5
Tool change
(1)
Loosen the screw (8) and tighten it firmly again after inserting the tool into
the tool receptacle (7).
Remove receptacle adapter in the case of tools smaller than Ø 3.2
mm.
Only use approved tool listed in the joke catalogue!
(2) In order to adjust the working stroke, remove the protective hood (1) and
after loosening the screw (10), set the desired working stroke by turning the
adjusting ring (9).
(3) Tighten the screw (10) again and install the protective hood as already de-
scribed.
Recommended stroke length:
0.5 - 3 mm for filing
3 - 6 mm for polishing
CAUTIO N!
clamp
loosen
n
tool
clamp
loosen
allen key SW4