7
Operation/ Maintenance/Care
joke
®
I n s t r u c t i o n m a n u a l A i r M A X 2 0 ,3 5 u n d 9 0 /2 0
14
The micro oil mister guarantees an even, rapid and precisely dispensable lubrication of
the hand grinder.
The oil mister is adjusted to approx. 1-2 drops per minute. Only a fraction of the falling
drops are misted and partly flow back into the reservoir.
Owing to the special air supply, it is possible to reduce the size of the oil particles. The
latter can be transported over long distances as micromist in the air flow. They are hardly
deposited. All surfaces with which they come into contact are intensively and very
uniformly wetted. An even, stable oil film forms immediately at the bearing sites, the
thickness of which can be rapidly and precisely adjusted.
Setting up and connecting the maintenance unit
1.
Check on the maintenance unit whether
- the condensation-water bleed screw is closed; closing is performed by turning
clockwise.
- the pressure controller screw is open; opening is performed by turning
anticlockwise.
2.
Fill the oil container up to the mark with JOKE
®
high performance lubricant X
73012.
The oil level must not rise higher than the baffle plate of the micro oiler.
See the current JOKE® catalogue for the order no. for the lubricant in various container sizes.
3.
Connect the line of the external air supply to the maintenance unit.
4.
Take care that the air flows through the housing in the direction indicated by
the arrow.
IM PO RTAN T!
INFORMATION
!
IM PO RTAN T!
