77
7
2
3
1
3
1
2
1
7
Operation use
1.
Stand the control unit at a suitable safe, dry place. The ambient temperature should be
between 0° and +40° C and relative humidity should be between 10 and 85 %.
2.
Once the control unit has been fully charged, remove the charger. Connect the hand-
piece to the controller (7.1.3).
3.
Select the handpiece rotation direction with FWD/REV (7.1.1).
4.
The device is switched on and off at the speed controller (7.1.2). The operating mode is
apparent from the LED control indicator (7.3.1).
5.
The speed can also be set using the speed controller (7.1.2).
6.
Select hand or foot operation at the H/F switch (7.2.2).
7.
If you wish to adjust the speed using the foot switch, connect the foot switch to the
controller(7.2.1) and set the H/F switch (7.2.2) to F. Determine the desired maximum
(7.1.2) speed. The foot pedal can now be used to adjust the speed up to the preset max.
value.
1 - FWD/REV switch
2 - Speed controller and
at the same time ON/OFF switch
3 - Handpiece connection
Fig. 7.1 Controller front view
Fig. 7.3 LED control indicator
Fig. 7.2 Back view control unit
1- LED control indicator
1 - Foot pedal connection
2 - Hand/foot operation selector switch
3 - Power supply unit/charger connection
The max. speed for the MPH33 handpiece is 33,000 rpm.
