joke 0 005 400, Instruction Manual

Page: 5 / 19

Page 3 - 1
Safety instructions
3
(1) This device has been built according to the latest technical standards
and generally accepted safety regulations. Nevertheless, it can consti-
tue a risk to the operator or third parties and a hazard to the device itself
or other equipment during use.
(2) Only use the device if in perfect working order and for its intended pur-
pose. You must always pay attention to the instruction manual and
safety instructions therein and be aware of the risks! Repair any faults
which could affect the device’s safety immediately by yourself or have
these repaired.
The device should only be used for grinding, milling and polishing using
the tools listed and approved in the JOKE catalogue „Surface Finis-
hing“. Any other use will be deemed to be contrary to its intended pur-
pose. The manufacturer cannot be held liable for any resulting
damages. The risk is borne solely by the user.
Correct use also includes compliance with the instruction manual and
an observation of the care and maintenance conditions.
(3) Keep the instruction manual handy at the device’s place of use.
(4) Pay attention to and observe generally applicable statutory and other-
wise binding regulations relating to accident prevention and environ-
mental protection in addition to the information provided in the
instruction manual!
(5) All personnel commissioned to work on or with the device must have
read this instruction manual, and particularly the safety instructions
chapter, before starting work. This applies especially for personnel who
only works with the device ocassionally.
(6) Stop the device immediately should you notice changes to the device or
its operating behaviour that are relevant to its safety. Have these reme-
died before restarting work.
CAUTION!