+
No. 8 Middle Road Guoxiang Bridge Lanjiang Street Yuyao Zhejiang China
3
3
4.2 How to answer a call:
1. JWAT909 : When receive a call, the loudspeaker will turned on, the speaker rings, and it automatically
connects to the broadcast mode after three beeps, which can be used to call people. When someone picks up
the handset to connect the phone, the loudspeaker is turned off and the handset mode is entered. Normal call
status, hang up the handset after the call ends. During the call, the volume of the handset can be adjusted
according to the environment.
2. JWAT910: The telephone will ring when there is a call. After picking up the handset to pick up the phone,
the ringing will stop and the two parties can talk normally. Hang up the handset after the call. During the call, the
volume of the handset can be adjusted according to the environment.
5. Product Dimensions and Installation
5.1 product dimensions
5.2 Telephone wiring: (JWAT909)
1. Amplifying speaker wire connection: The speaker wire UL2464 4*18AWG is connected to the two wires of
the explosion-proof speaker through the terminal block in the explosion-proof junction box. The speaker wire
does not distinguish the wire sequence and color. Please note that there should be no exposed copper wires
during the wiring, and the terminal The screws should be tightened, and do not lock on the insulated wire.
2. Network cable connection: The RJ45 crystal plug has been suppressed when the network cable leaves the
factory. You can use the adapter to connect in the junction box, or cut off the crystal plug and connect it
directly in the junction box with the system network cable through the terminal. Note that the connection
should be connected according to 568B. Don't make the wrong connection when wiring, so as to prevent the
phone from not working.
3.Power cord connection: The power cord adopts UL2464 3*18AWG cable, the green wire is the Earth wire,