OG2:5
RT655 Operator’s Guide
Johnston Sweepers Limited
Chapter - Controls
Page Issue A
Sweeping Controls
Symbol ID Description
M
Supawash option; 2 position switch - OFF/ON illuminated when selected.
Q
Powasave – 2 position switch – operates with gutterbroom. Overrides pre-
set pressure level to allow maximum down pressure on brush.
U
VEG opening switch; 3 position sprung centred switch controls an electrical
actuator CLOSED / OFF / OPEN.
W
Ignition switch - 2 position - OFF/ON.
NB :
Only beacons will operate when switch is off.
X
Engine throttle control; 3 position spring centred switch
REDUCE/OFF/ INCREASE.
R
Beacons; 2 position switch - OFF / ON. illuminated when selected.
N
Hood reverse pick-up select switch; 2 position switch - OFF/ON.
O
Rear Worklamp; 2 position switch OFF/ON illuminated when selected.
P1
Water tank low level indicator - illuminated when tank empty.
P2
Water tank high level indicator - illuminated when tank is full.
V
Engine crank button - push to crank. Flashes to indicate engine fault
requests.
Src:Eng
SPN00000
Y
CAN FED - John Deere, Diagnostics, Engine hours, Engine RPM, Coolant
Temperature, John Deere Fault codes.
S1
VEG - position 1. Regen Mode
-
Colour Red
S2
VEG - position 2. 60% Regen
-
Colour Yellow
T1
VEG - position 3. 30% Regen
-
Colour Blue
T2
VEG - position 4. Vacuum Mode
-
Colour Green
*
Denotes Optional Equipment
