13
en
Clean brushing cylinder.
Caution:
Danger of injury due to sharp objects.
Wear gloves to protect your hands from injury!
Check the brushing cylinder at least once every month for abrasion.
Too short bristles or damaged / dirty brushing cylinder can result in damaging the floor surface!
t
Push the side cover away from
the brush housing.
t
Heben Sie mit einem
Schraubenzieher langsam die
Rollenhalterung an.
t
Slowly pull out the brushing
cylinder.
t
Remove the roll mounting from
the brushing cylinder.
The roll mounting will be reused.
Check the bristle length before assembly and replace the brushing cylinder if necessary.
Too short bristles or damaged / dirty brushing cylinder can result in damaging the floor surface!
t
Clean the brushing cylinder.
t
Push the brush cylinder with the
hexagon opening into the brush
housing.
The white marking must be on a
flat surface (see picture).
t
Press the roll mounting up to the
dead stop.
t
Push in the side cover into place.
1
2
3
4
