Johnson Trizzy, Instructions For Use Manual

Page: 12 / 20

14
SPECIAL WARNINGS
At first use clean all the parts that come
into contact with food.
The blades are extremely sharped. So be
very careful when handling them, when in-
sert or remove or washing.
Never exceed the maximum quantities and
never introduce liquid into the bowl ex-
ceeding 60°C.
Do not operate without cover in place.
Do not leave the appliance unattended.
Parts:
A) Motor base
B1-B2) Seats for locking bowl
C) Safety device anti accidental
switching on
D) Rotating shaft
E) Bowl
F1-F2) Bowl locking notches
G1-G2) Cover locking notches
H) Cover
L1-L2) Guide for block cover
M) Blades
N) Triangle signal of lid lock
P) Start button
USE
With the plug disconnected from the
power outlet,
place the bowl (E) on the motor base (A),
aligning the fixing notches of the bowl
(F1-F2) with the seats (B1-B2) of the
motor base. Block with a clockwise rota-
tion until hear a click.
Place the blades (M) centring on the rota-
ting shaft (D).
Place the foods to process into the bowl
without exceeding the quantity and size
(pre-cut in small pieces the foods larges)
Close the bowl with lid (H), lock it by tur-
ning clockwise so the guides (L1-L2)
slide the locking notches of the lid (G1-
G2).
WARNING if the lid is not positioned
correctly the appliance will not turn on
due to accidental anti switch on device.
If it is properly mounted the closed pa-
dlock symbol places above the guide (L1)
coincides with the triangle (N) on the
motor body.
Insert the plug into a suitable socket, after
checking the rating of products are com-
patible with it.
To start the appliance, press and hold the
button (P).
The appliance can operate in continuous
operation at the maximum for 1/2 minute.
Before restarting, wait several minutes and
after 5 restarts, the appliance should be
keep rest for 30 min.
After processing, unplug the appliance
from the electric power and reassemble it
in backward.
WARNING to the blades, danger of cut-
ting both during the recovery of the
processed food and in their cleaning.
CLEANING
Clean with water and non-aggressive de-
tergents the parts in contact with food. Do
not use abrasive sponges on any part of
the appliance.
Clean the motor body with a soft, dry
cloth, do NEVER spray the motor body.
Dry thoroughly before storing the ap-
pliance and its parts