11
3.2 Time setting
Hold “SET” key for 2 seconds to enter into time setting.
The setting item will flash 1 HZ.
The sequence of time setting:
12/24HR
OFF/SET
Hour
Minute
Language
Year
Month
Date
Exit.
Press “SET” key to confirm the setting.
Press “UP/CH” key one time, the setting will go forward one step;
hold the key for 2 seconds, it will run forward by 8 steps/second.
Press “DOWN/CF” key one time, the setting will go backward for one
step; hold the key for 2 seconds, it will run back by 8 steps/second.
The system will exit automatically if no key is operated in 15 seconds.
And the previous setting will be confirmed automatically.
3.3 Alarm set
Hold “ALM” key for 2 seconds to enter into alarm setting.
The setting item will flash 1 HZ.
The sequence of alarm setting: Hour
Minute
Exit.
Press “UP” key one time, the setting will go forward for one step;
hold the key for 2 seconds, it will run forward by 8 steps/second.
Press “DOWN/CF” one time, the setting will go backward for one step;
hold the key for 2 seconds, it will run back by 8 steps/second.
Press “ALM” key to confirm the setting.
The system will exit automatically if no key is operated in 15 seconds.
And the previous setting will be confirmed automatically.
Press “ALARM” key to switch alarm on/off, sequence:
AL1 ON/AL2 OFF
AL2 ON/AL1 OFF
AL1/AL2
AL1/AL2 OFF.
The BUZZER will ring for 2 seconds as below:
a) 0 – 10 sec.: one “BI” per second.
b) 10 – 20 sec.: two “BI” per second.
c) 20 – 30 sec.: four “BI” per second.
d) after 30 sec.: “BI” continuously.
e) When the alarm is ringing, click “SNOOZE” key once to enter into
snooze state, and ring again after 5 minute later; press other
key to exit.
IV. Power-On and reset
When Power-On and reset, LCD full display for 3 seconds enter the normal
state after “Beep” checking temperature receive RF for 3 minutes.
