8
The packaging (plastic bags, nails, expanse polystyrene, etc.) must not be left within
children’s reach or reach of incapable people as it represents a potential source of
danger.
Before connecting the appliance, ensure the technical data corresponds to the electri-
city mains data.
If the plug and socket are incompatible, contact qualified staff for the necessary adap-
tation operations.
Do not use adaptors, multiple sockets and/or extensions.
If their use is indispensable, only use material compliant with the safety standards in
force and with the required compatibility for the appliance and the electricity mains.
Using the appliance for the first time, ensure you have removed the label or protective
sheet.
Do not use the device if it appears damaged or if it does not work properly; check if
the power cable is in good conditions; in case of doubt contact the authorized service
center.
If the appliance is equipped with air sockets, ensure they are never blocked, not even
partially.
Use of any electrical appliance means you must comply with fundamental rules, in par-
ticular:
ATTENTION: Never immerse or wet the appliance; never use it near water, in the bath,
in the sink or near any other container with liquids. If the appliance should accidentally
fall into water, NEVER try to get it out, but instead immediately take the plug out of the
electrical socket.
Then bring it to a qualified support centre for the necessary checks.
Do not touch the appliance with wet or damp hands.
Do not use the appliance barefoot.
Do not pull the appliance or the cable to remove the plug from the socket.
Do not insert any objects or your own fingers into the protection grid of the fan.
Keep the appliance far from any flammable or explosive object or substance during
use.
Do not leave the appliance exposed to atmospheric agents (rain, sun).
Disconnect the plug from the electrical socket when the appliance is not in use and
before carrying out any cleaning or maintenance operation.
The power supply cable must be unrolled for its entire length to avoid overheating.
The power supply cable must not be near sources
of heat and/or sharp surfaces.
If the power supply cable is damaged, replace it, which must be carried out by qualified
staff.
In case of a fault and/or malfunction, switch off the appliance and contact qualified
staff.
Any tampering or intervention carried out by unqualified persons causes the warranty
to become null and void.
