SLEEP
A.
Set the On/Off/Auto/Alarm Switch
(7) to ‘OFF’, ‘AUTO’ or ‘ALARM’ po-
sition.
B.
Press the Sleep Set Button (4) and
Minute Set Button (6) together. The
sleep time will be displayed and
count down from 59 minutes to
zero. Release the button when the
required sleep time is displayed.
C.
The radio will now operate until
the sleep time has elapsed or may
be switched off by pressing the
Snooze Off Button (1).
RADIO
The FM band required the use of the
FM aerial wire, this should be uncoi-
led and positioned for best recep-
tion. Set the On/Off/Auto/Alarm
Switch (7) to ‘ON’ position.
A.
Adjust the Tuning Control (8) to
select the desired station.
B.
Adjust the Volume Control (9) as
required.
C.
To turn off the radio, set the
On/Off/Auto/Alarm Switch (7) to
‘OFF’. If the radio does not switch
off this may be caused by inadver-
tent operation of the Sleep Set But-
ton (4). To cancel this presses the
Snooze/Sleep Off Button (1) once.
D.
Adjust the Switch (14) to the re-
quired waveband.
BATTERY BACK-UP
Inset a 9-volt battery (not included)
in the compartment located in the
cabinet bottom; use preferably a
long-life battery. Incase of tempo-
rary power failure, the battery will
keep the time settings even if the
display won’t show.
Note:
The effectiveness of this fea-
ture depends entirely on the fre-
shness of your battery. The circuit
will not keep the right time if the
battery is old or of poor quality.
CLEANING
Clean the cabinet with a soft cloth
moistened with water or mild deter-
gent. Do not use solvents such as
alcohol, benzene or thinner, as the
may damage the cabinet finish.
Make sure to disconnect the mains
lead from the supply before clea-
ning. Please retain these instruc-
tions for future reference.
SPECIFICATIONS
Frequency Range:
AM 540-1600KHz
FM 88 –108 MHz
Power Source:
AC 230V ~ 50 Hz, 6W
DC9V (For back-up)
Power Output:
300 mW
10
