Johnson Gentile, Instructions For Use Manual

Page: 12 / 20

12
SAFETY INSTRUCTIONS
Never use when taking a shower and don’t
place near water containers because it may
to fall giving a shock.
Components
A ON-OFF Switch
B Plates
C Indicator light
D Thermally insulated tips
E Wall hook
OPERATING INSTRUCTIONS
Make sure the (A) switch is on OFF (ap-
pliance turned OFF).
Place the power plug into a suitable power
outlet.
Connect the appliance pushing the switch
to ON, the indicator (C) will light and will
heat the plates.
Before the use of the appliance the plates
should be in temperature.
WARNING:
do not put this appliance in the proximity
of flammable materials (curtains, inflam-
mable materials, etc.) because the heat of
the plates may cause fire.
Pay attention to avoid burns.
When the appliance is ready to use operate
as follows.
For bleached, damaged or fine hair, use
for short periods.
For coarse, thick, ethnic and strong hair in
good conditions, to short the working
time, operate during more time.
For a perfect hairstyle don't use hairspray
or gel before or during the hairstyle, after
you may use it normally.
Before to begin the hairstyle, we recom-
mend to take a wisp of dry hair, no wider
than 5 cm.
Brush to make it soft.
During the first minutes of the operation it
may occur the leakage of smoke or smell:
it is normal, it will disappear after some mi-
nutes.
Straight hair
Insert a hair wisp of 5 cm between the pla-
tes, then holding closed the plates, make
slide the appliance from the root until the
end of hair. To avoid burns and improve
the lock of the plates, apply a light pres-
sure also on the thermally isolated tips (D).
Outward hair ends
Insert a hair wisp of 5 cm between the pla-
tes, then holding closed the plates, make
slide slowly the appliance from the root
until the end of hair, then rotate outward.
Inward hair ends
Insert a hair wisp of 5 cm between the pla-
tes, then holding closed the plates, make
slide slowly the appliance from the root
until the end of hair, then rotate inward.
At the end of the operation disconnect im-
mediately the appliance and remove the
plug from the outlet. To cool the plates,
place the appliance on a heat-resistant
surface and avoid accidental contacts that
may cause burns.
MAINTENANCE:
If is necessary to clean the appliance, ve-
rify before that it is unplugged and cooled.
Don’t use substances like alcohol, petrol
or solvents but clean the surfaces with a
soft cloth.