17
time, test for gas leaks and check the burners are not
obstructed. Clean it before using it.
How to change the cylinder
Close the gas supply on the regulator and enable the
product to completely cool before removing and re-
placing the cylinder. DO NOT replace the cylinder
while the product is working.
The cylinder should be replaced in a flame-free en-
vironment.
Do not smoke when replacing the gas.
If you are replacing an empty cylinder, close the gas
supply on the regulator and remove the cylinder from
the product. Remove the regulator from the cylinder.
ATTENTION:
The plastic parts of the product are not covered by warranty.
ATTENTION:
If necessary, bring or send the appliance to the authorised support centre, remember
to clean all its parts carefully.
If the appliance is even slightly dirty or with scale or food deposits, limescale, dust
or other; outside or inside: for hygiene-sanitation purposes, the support centre will
refuse to take the appliance without looking at it.
ATTENTION:
The symbol on the product or packaging indicates the product must not be consi-
dered as normal domestic waste, but should be brought to the appropriate collection
point for recycling of electrical and electronic appliances.
Appropriately disposing of this product means you contribute to averting negative con-
sequences for the environment and for health, which could derive from inadequate di-
sposal of the product.
For more detailed information on recycling of this product, contact the municipality, the
local waste disposal service or the shop where you bought the product.
