16
Parts of appliance
a. Appliance casing
b. Switch on/speed selector
c. Light indicator
d. Light
e. Head locking keys
f. Guards
g. Razer
h. Hair clipper
i. Epilator
l. Roll pedicure
m. Brush
n. AC adaptor
o. Plug
p. Adaptor plug
q. Socket for plug
To facilitate and make the action of the
appliance comfortable, you are advised to
have a hot wash with accurate drying be-
fore carrying out the treatment.
Battery charging
(Fig. 1)
Insert the plug (o) of the socket (q) adaptor
situated on the bottom of the appliance
and the plug (p) in an electricity socket
suitable to receive it.
When the appliance is connected to the
electricity socket, the indicator light (c)
switches on.
The first battery charge must last 16
hours.
After charging, remove the plug (o) of the
adaptor from the lower part of the ap-
pliance and disconnect the plug (p) from
the electrical socket.
The appliance can also be used not com-
pletely charged, however keeping it con-
nected to the electricity socket.
Instructions for use
Fig. 2 Prepare the suitable head for treat-
ment you intend carrying out, over the ca-
sing of the appliance and press until it
locks. Ensure it is correctly orientated and
matches the profile below.
Remove the transparent guard (f).
Fig. 3 To replace the head, firstly bring the
selector (b) to zero and then press the two
keys (e), and remove it.
Fig. 4 To activate the appliance, slide the
selector (b) upwards.
The first click activates the low speed, the
second high speed.
The light (b) switches on automatically
which helps view the intervention zone.
Fig. 5 After each use, before bringing the
selector (b) to zero, then press the two
keys (e) and remove the head, cleaning it
using the brush (m).
To facilitate future use, before leaving the
appliance, it is useful to partially recharge
the battery.
Suggestions
Epilator
(i)
It can be used to eliminate hair from: legs,
arms, underarms, bikini zone, individual
hairs from the upper lip and chin.
Hold the skin around the treatment zone
taut with one hand.
Arrange the appliance 90° and bring in
contact with the skin, without exerting
strong pressure.
Make rotating movements in the direction
of skin growth.
Keep your legs stretched when working on
the zone behind your knees.
Roll pedicure
(l)
It can be used to carry out a beauty treat-
ment to obtain smooth feet and remove
dead skin from other parts of the body.
Attention:
do not hold the rotating abra-
sive cylinder between your fingers because
it can cause dangerous injuries.
