Johnson Daga, Instructions For Use Manual

Page: 8 / 24

8
COMPONENTS
A) Switch
B) Regulation knob for slice thickness
C) Support wing
D) Carriage
E) Food presser
F) Blade
H) Feet with suction cup
INSTRUCTIONS FOR USE
Place the appliance on a stable surface
and make the suction cups of the feet
H
adhere.
IMPORTANT . Before plugging in the
plug in the socket, suitable to
receive it, make sure that the switch
A is
in position “0”.
Adjust the cutting thickness acting on the
knob
B .
On the knob you will see notches that
indicate the thickness in mm of the slice
to be cut.
In order to be precise put the knob on
zero position first and then turn it until
the thickness wanted.
After having placed the food on the D
carriage switch on the machine pressing
the switch
A .
To obtain a good performance always
keep a regular push on the carriage
avoiding to press too much on the
blade.
The food presser
E must always be used
unless the size or shape of the piece to
be sliced does not allow you to use it.
The appliance is suitable for a functio-
ning time of not more than 10 minutes.
After having finished to use the applian-
ce always remove the plug.
CLEANING
Before starting any cleaning, stop the
appliance, remove the plug from the
socket and zero the cutting thickness.
To render the cleaning operations easy,
the carriage may be tilted externally on
its guide.
Use a soft cloth for cleaning the machi-
ne.
You can remove and wash the food
presser
E .
After having cleaned the machine reas.