© 2022 Johnson Level & Tool — 6
KEY DEFINITIONS
PROJECT KEYS
Studs
: Calculates number of studs, based
on an entered linear distance and a stored
On-center Spacing
.
Note: Automatically adds one stud to the calculated
answer to account for one on the end .
On-center for Studs
: Stores On-center
spacing for studs in Inches . To recall
this setting, press .
Default is 16 Inches .
Flooring
: Calculates the required length
for 12', 13', 15' or 6' wide rolls, based on an
entered area . Calculates the coverage area,
in Square yards, for each roll width, based
on the entered length .
Sheets
: Calculates the number of
4' x 8', 4' x 9', 4' x 10' and 4' x 12'
sheets, based on entered linear
distance or area .
Custom Tile
: Calculates number of tiles
needed based on an entered area and a
stored Tile Size . This is used separately from
the regular Tile Key ( ) .
Note: Calculation does not account for grout width
for custom tiles, so you will need to adjust for this .
Studs
Flooring
Stor
Conv
Custom
Tile
Studs
Flooring
Rcl
Studs
Tile
