14
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
The symbol on the product or on the packaging
indicates: Do not use this appliance near baths or
sinks.
PARTS
A. Handle with display (B), controls (C, D, E) and pivoting power cord (F)
B. Display
C. Temperature increase key
D. Temperature decrease key
E. ON/OFF key
F. Pivoting power cord end
G. Reverse T connector
S. Terminal locknut
H19, L26, M33.
Elements with ceramic-coated cylindrical rod (N), tongs (O) and thermo-insulating
tips (P).
N. Ceramic-coated rod
O. Tongs
P. Heat-insulated safety tip
Q. Seat for Reverse T connector
R. Bag for storing the parts of the curling iron
ASSEMBLY
Select the element (H19 or L26 or M33) with the most suitable diameter for the treat-
ment.
To connect the element to the handle: turn the locknut (S) so that the “empty triangle”
symbol coincides with the “full triangle” symbol located on the handle.
Keep the tongs and commands turned upwards in order to allow the connector (G) to
insert right down into the seat (Q) of the terminal.
Once the selected element has been connected, press it against the handle and lock it
into position by turning the locknut (S) until the two “full triangles” coincide.
STARTING AND SETTING
Turn on the appliance by pressing the ON/OFF switch (E).
The appliance is preset to automatically reach a temperature of 180°C.
On start-up, the display turns green indicating that the temperature is increasing pro-
gressively.
When the temperature reaches 180°C, the curling iron stops heating and maintains
this temperature.
Operating temperatures can vary between 50°C and 200°C.
Summary of Contents for Boucles
Page 2: ...2 230 V 50 60 Hz 50 W...
