14
Particular warnings
The appiiance is equipped with a safety
sy stem to avoid operation if the jug is
incor rectiy assembied, therefore:
ATTENTION, the appliance DOES NOT
WORK ifthejug is not correctiy assembied.
lmpornant
Assemble the appiiance correctiy before
connecting it to the electricity mains.
Do not overfill the jug with ingredients.
Do not exceed the operating times, com-
piy with the instructions for use.
Never leave the appliance unguarded
when on. Allow ali hot ingredients to cool
before chopping them or putting them in
the jug. Keep the appliance out of reach
of chiidren. Avoid touching the SHARP
biades, espe cially when the appiiance is
connected to the eiectricity mains.
lf the biades jam, DiSCONNECT THE AP
PLIANCE from the socket before removing
ali the ingredients causing the probiem
and do so using a spatula.
Never put your finger or other objects in
the container when the appiiance is wor
king.
Never piace the motor unit in water or
ano ther type of iiquid, never rinse under
a tap. Use a damp cloth.
Disconnect the appliance immediately
after use, for exampie before removing
the jug.
Components:
A. Mixer
B. Plug to add ingredients
C. ingredients top-up hole, plug com-
partment (B)
D. Lid
E. Jar
F. Steel biade
G. No accidental switch on device
H. Motor unit
I. feet with suckers
PM.Selector 4 speeds
L Cabie winder
M. Suction cup feet
USING THE APPLIANCE
The biender is suitabie for: biending
li quids,for exampie, dairy products,
sauces, fruitjuice and soup and mixing
drinks,mii kshakes and mixing soft
ingredients.
Do not overfìll the jug with food. Do not
piace hot foot in the jug.
Leave hot food to cooi before processing.
alimenti.
Position thejug (E) on the base (H)
correspon ding to the notches, then
slightiy turn in an anti-clockwise direction
untii it locks (fig. 1).
Piace ali the ingredients in the jug; you
are advised to dice food to mix and add
liquid, if posslbie.
Ciose the iid (D) of the jug (E) by gentiy
pressing. Put the piug (B) in piace (C) on
the lid (D) and turn it in an anti-ciockwise
di rection to lock it.
lnsert the mixer (A) in the compartment
on the plug (B).
You must then insert the piug in the
socket.
Set the selector (F) to the desired speed
(1-2-3-4)
During blending flavour can be added
in through the flavouring adding hole and
container (C) .
When blending finished, turn the switch
(F) to “0” for stop and then remove the
jug (D) by turn it clockwise (fig. 5).
if you need to use the “Puise” button for
proces sing, press and reiease the button
(N). Keep the motor unit stili with both
hands whiie the appiiance is working.
Do not keep it on for more than a 1/2
minute at a time. lf you have not stopped
biending after a
1/2 minute, switch off the appliance fora
minute before switching on again. if the
appiiance overheats, leave it to coolbefo-
re continuing.
