©2012 Johnson Level & Tool
9
Power On/Off Button:
Press this button to power on/off the laser.
The laser is in self-leveling status when powered on.
Default rotate speed is 600 RPM
Default beam shield is off in all four quadrants;
Default grade for X-axis and Y-axis is 0.
The remote channel will display CH1.
If there is a matched remote control with the power on, the
remote status will display
if there is not a matched remote, it
will display
.
When powered on, the laser will automatically check the battery
capacity.
When powering on the laser it will enter into the self-leveling mode.
The TILT display will blink for thirty seconds after the lasers starts
to rotate. During these thirty seconds, if the laser is moved it will
stop rotating and re-level itself. After thirty seconds, the laser
will enter into the TILT mode and the LCD will show a solid
TILT display. (See TILT button)
Grade axis and Grade Value Button:
With the laser on, press the Grade Axis and Position button and hold
in for two seconds. The laser will beep once and the laser will enter
the X-axis grade setting mode. The X-axis symbol “X” and axis
direction symbol (+) will flash. A short press of the button will move
the position to the next symbol. Pressing the grade value buttons
will change the values. When the X-axis setting is
6274H-2_Manuals 9/26/12 11:32 AM Page 9