©2010 Johnson Level & Tool - Rev. 1
21
Stake-out
Stake-out mode is designed to mark off repetitive equal distances. For
example, fence post installation or framing.
1.
To use Stake-out, you have to set one value or “stake” in
memory.
2.
Turn the unit on.
3.
Press three (3) times to enter the first stake setting.
4.
Press to increase your value.
5.
Press to decrease your value.
6.
Hold for one second to shift to left.
7.
Hold for one second to shift to right.
8.
Once value is set, press to enter.
9.
Pressing and at same time will restore zero.
After the stake is set, N1 will display on screen.
Enter Continuous Measuring Mode. An arrow will
guide direction. When approaching the set stake,
it will alert you by beeping. This function can be
stopped by pressing the red power button .
Setting N1
Screen show direction
and N1
