Johnson Pump Top Wing Series Manual Download Page 46

Page: 46 / 57

A.0500.301/314.C – IM-TW/10.00 GB (0401)

TW1

TW2

TW3

TW4

TW1

TW2

TW3

TW4

4.7.6

Synchronization of the rotors

4.7.6.1

Manual synchronization

1. Position the rotors by turning the drive shaft manually to the position shown in the

diagram.
Check the clearance between the rotors with a gage blade.
In both positions dimension X should be the same.

2. Place a block of soft material between the rotors to lock them against each other.

3. Tighten now the screws of the locking assembly/elements in the same way as

described for the lay shaft.

4. Check the clearance between the rotors, turn the drive shaft 180

and check the

clearance in this position also. In both positions dimension X should be the same.

5. Remove the retainers and rotors.

Pump

Description

Torque [Nm]

TW1

Allen screw DIN 912 M5x20 (12.9)

8.5

TW2

Allen screw DIN 912 M6x18 (12.9)

TW3

Allen screw DIN 912 M8x22 (12.9)

TW4

Allen screw DIN 912 M10x25 (12.9)

Summary of Contents for Top Wing Series


























































Search results

Summary of Contents for Top Wing Series

Reviews:

Related manuals for Top Wing Series

Brands by name

Popular brands

Johnson Pump Top Wing Series, Manual

Search results

Summary of Contents for Top Wing Series

Reviews:

Related manuals for Top Wing Series

Brands by name

Popular brands