Johnson Pump SPX Flow CombiLineBloc, Instruction Manual

Page: 15 / 67

CLB/EN (1901) 6.6
General 13
CombiLineBloc
2 General
2.1 Pump description
The CombiLineBloc is a built-in circulation pump constructed with a lantern piece and a
standard IEC electric motor with flange. That means that the medium to be pumped will
not get into the electric motor. The pump is provided with a mechanical seal with bellows
mounted on the stub shaft which is mounted directly on the motor shaft. The pump has
been designed as a monobloc pump which means that pump, lantern piece and electric
motor have been assembled to form one compact unit. Suction and delivery flange are
in-line, so the pump can easily be built into straight pipes without a foundation being
required. The pump can also be mounted with the suction bend placed on a fundation by
means of the special support device. The pumps are available in 2 speeds. The flanges
are according to EN 1092-2 (DIN 2532) PN10 or EN 1092-2 (DIN 2531) PN6.
2.2 Applications
• In general, this pump can be used for thin, clean or slightly polluted liquids. These
liquids should not affect the pump materials.
• Further details about the application possibilities of your specific pump are mentioned
in the order confirmation and/or in the data sheet enclosed with the delivery.
• Do not use the pump for purposes other than those for which it is delivered without
prior consultation with your supplier.

Using a pump in a system or under system conditions (liquid, working
pressure, temperature, etc.) for which it has not been designed may hazard
the user!