Johnson Pump SPX Flow CombiBlocHorti Series, Instruction Manual

Page: 13 / 75

CL-CBH/EN (1901) 7.6
Introduction 11
CombiLine-CombiBlocHorti
1.5 Forwarding and storage instructions
1.5.1 Packaging
The pump is packed in a solid cardboard box. The bigger types are provided with a
wooden bottom. The pump is bolted down on this bottom. The forwarding and storage
instructions are stated on the box by means of symbols. Adhere to these instructions.
Furthermore, the box contains the same information about the pump as the information
written on the label on the cover of this manual. Always leave the pump in the packaging
as long as possible in order to avoid damages and facilitate possible further transport in
case the pump has to be moved elsewhere. All boxes are provided with grips. Use these
grips as much as possible in case of manual transport.
For the bigger pump types, the wooden bottom is designed as a platform, allowing the
boxes to be moved by forklift.
!
When using a forklift always set the forks as far apart as possible and lift the
package with both forks to prevent it from toppling over! Avoid jolting the
pump when moving it!
1.5.2 Opening the packaging
The boxes are kept shut by 2 plastic straps. These straps also serve to keep the bottom
and the covering box together.

Always make sure that the box stands on the floor! Wear gloves: the straps
are under tension and may be sharp!
1 Cut the plastic straps.
2 Remove the covering box.
3 Unscrew the pump from the bottom.
4 Rest the pump on the supporting brackets under the suction bend.
➢
Do not throw away the packaging! SPXFLOW is striving for an environmental minded
management. Please contact us about the possibilities of returning your packaging
materials.
1.6 Ordering parts
This manual contains a survey of the spare parts recommended by SPXFLOW as well as
the instructions for ordering them.
See http://www.spxflow.com/en/johnson-pump
➨
industries
➨
horticulture
➨
products
➨
spare parts.
When ordering parts or for any correspondence you should always state all data
stamped on the name plate.
➢
This data is also printed on the label on the front of this manual.
If you have any questions or require further information with regard to specific subjects,
then do not hesitate to contact SPXFLOW.