Calibration
1. Locate the front and side calibration port rubber plugs.
2. Carefully remove the rubber plugs.
3. Compensator must be unlocked and power on before making
calibration adjustments.
4. Use a 3mm Allen wrench.
5. For adjustment to the level/front beam, turn the Front A calibration screw
clockwise to raise the beam and counter-clockwise to lower the beam.
6. For adjustment to the plumb beam, turn the Side B calibration screw
clockwise to move the plumb beam away from you and counter-clockwise
to move the beam toward you.
10
©2008 Johnson Level & Tool
1282H-English 6/11/08 11:37 AM Page 10
