background image

MG-A47691-05 FRAME ASSEMBLY

6. 

Upright support: Using (16) 3/8-16 x 5” bolts, (32) 3/8” washers and (16) 3/8” nuts 

washers, attach the upright support to the top of the uprights. 

Do not tighten bolts.

7. 

Chin bar: Using (16) 3/8-16 x 4” bolts, (32) 3/8” washers, and (16) 3/8-16 nuts, attach 

both chin bars between the tops of the uprights. 

Do not tighten bolts.

8. 

Front upright support: Using (8) 3/8-16 x 4” bolts, (16) 3/8” washers and (8) 3/8-16 

nuts, attach the front upright support between the tops of the (2) front uprights. 

Do 

not tighten bolts.

9. 

Weight storage bottom: Using (16) 3/8-16 x 1” bolts and (16) 3/8” washers, attach 

the bottom of the weight storage to the bases. 

Do not tighten bolts.

STEP 7

STEP 8

STEP 6

10. 

Upright cross support: Using (16) 3/8-16 x 5” bolts, (32) 3/8” washers and (16) 3/8” nuts, attach 

the upright cross support between the uprights. 

Do not tighten bolts

11. 

Weight storage top: Using (8) 3/8-16 x 4” bolts, (8) 3/8” fender washers, (8) 3/8” washers and (8) 

3/8” nuts, attach the top of the weight storage to the upright cross support. 

Do not tighten bolts

12. 

Tighten bolts: Starting with the center diamond plate and working from bottom to top, tighten all 

bolts to 30-ft lbs.

Assembly Complete!

STEP 9

STEP 10

STEP 11

3/8” Fender washer

Summary of Contents for Matrix MG-A47691-05

Page 1: ... x 101 Weight Horn Diameter Weight Plate Storage 47 63 mm 1 875 Ensure a minimum clearance width of 0 6 meters 24 for access to and passage around MATRIX strength equipment Please note 0 91 meters 36 is the ADA recommended clearance width for individuals in wheelchairs WARRANTY For North America please visit www matrixfitness com for warranty information along with warranty exclusions and limitati...

Page 2: ... use of the equipment by a person responsible for their safety 3 All warnings and instructions should be read and proper instruction obtained prior to use Use this equipment for its intended purpose ONLY 4 Inspect the machine before use DO NOT use machine if it appears damaged or inoperable 5 Do not exceed weight capacity of this equipment 6 ALWAYS use a spotter if using free weights 7 Balance the...

Page 3: ...ses where the machine is to be used Using 8 3 8 16 x 1 bolts and 8 3 8 washers attach base support to bases Do not tighten bolts 3 Using 4 3 8 16 x 3 4 BHCS attach the diamond plate to the 2 rear supports Do not tighten bolts 4 Attach each upright to the base using 24 3 8 16 x 1 bolts and 24 3 8 washers Do not tighten bolts 5 Upright support Using 4 3 8 16 x 1 bolts 4 3 8 16 x 5 bolts 12 3 8 washe...

Page 4: ... tighten bolts 9 Weight storage bottom Using 16 3 8 16 x 1 bolts and 16 3 8 washers attach the bottom of the weight storage to the bases Do not tighten bolts STEP 7 STEP 8 STEP 6 10 Upright cross support Using 16 3 8 16 x 5 bolts 32 3 8 washers and 16 3 8 nuts attach the upright cross support between the uprights Do not tighten bolts 11 Weight storage top Using 8 3 8 16 x 4 bolts 8 3 8 fender wash...

Reviews: