25
J O H N S O N F I T N E S S T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O
24
J O H N S O N E L L I P T I C A L E 8 0 0 0
J O H N S O N E L L I P T I C A L E 8 0 0 0
P7
P8
N/A
0
65,000 hrs
N/A
hour
30 sec
30 sec
180 sec
1
second
ACCUMU-
LATED
TIME
PAUSE
TIME
CUSTOM
SETTING
DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION
Accumulated time is not editable, but
only for display. Holding the Left and
Right Arrow keys simultaneously to reset
the accumulated time. After the machine
reaches the maximum time, it will reset
to "0" automatically.
This is the maximum time during which a
workout can remain in pause mode.
Restrictions exist for the machine not
equipped with a battery.
P9
P10
P11
P12
P13
P14
P15
EL
N/A
N/A
N/A
MODEL
SOFTWARE
VERSION
ERROR
LOG
METS
LANGUAGE
CB - Upright Bike
RB - Recumbent Bike
EL – Elliptical Trainer
ST - Stepper
Software version is not editable, but only
for display.
If this option is "ON", the METs prompt
becomes an individual display in PROMPT
AREA. If "OFF", there will be an alternate
prompt in RPM and METs at the lower-
right corner of the WORKOUT PROFILE
WINDOW.
The function would clear all custom
settings had stored on the unit and all
settings return to manufacturer default
value. Holding the Left and Right Arrow
keys simultaneously to clear all custom
settings values.
N/A
English
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
UNITS
The measurement unit prompts for weight,
distance, and speed.
Metric
Metric
English
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OFF
ON
OFF
N/A
N/A
RESET
ALL
N/A
N/A
N/A
N/A
N/A
T h e n a t i v e l a n g u a g e p r o m p t s i n t h e
INSTRUCTION CENTER.
Error log is not editable, but only for display.
Holding the Left and Right Arrow keys
simultaneously to erase the error log.
MAINTENANCE
Johnson Elliptical Trainer E8000 is built for commercial environment 12 hours a day and seven
days a week. However, as a club manager or owner, you are responsible for cleaning and
maintaining the unit’s integrity. If you fail to maintain the elliptical trainer as described below,
it could affect or void the Johnson limited warranty.
NOTE:
Safety of the equipment can be maintained only if the equipment is examined regularly
for damage or wear. Keep the equipment out of use until defective parts are repaired or
replaced. Pay special attention to parts that are subject to wear, such as display console,
console mounting screws, handrails, link arms, pedal arms and pedals.
DAILY INSPECTION
Look and listen for loose fasteners, unusual noises, and any other indications that the
equipment may be in need of service. If you notice any of these, obtain service.
DAILY MAINTENANCE
Johnson Fitness recommends the E8000 be cleaned before and after each workout. The
following daily maintenance tips will keep your unit operating at peak performance:
1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces.
DO NOT use ammonia, chlorine, or acid-based cleaners.
2) Keep the display console free of fingerprints and salt build-up caused by sweat.
3) Frequently vacuum the floor underneath the unit to prevent the accumulation of dust and
dirt, which can affect the smooth operation of the unit.
MONTHLY MAINTENANCE
Perform the following services each month, or as needed:
1) Check that the console, handrails, link arms, pedal arms and pedals.
RECYCLING THE BATTERY
When the Johnson elliptical trainer is about to be discarded at the end of its useful life, the
rechargeable battery must first be removed and recycled. If the elliptical trainer is being
equipped with the battery. To access the battery, unscrew the cover on the back of the
console. To remove the battery, disconnect the cable.
