crank disk, side cover, crank arm replacement v1.1 08/14/06 Jhp |
Crank Disk/Side Cover/Crank Arm Replacement
(1.2E & 2.2E) Continued
$SBOL"SN/VU
$SBOL
$SBOL1VMMFS
Figure 5
CONSOLE MAST BOOT
ACCENT PLATE
11) Lift console mast boot. (Figure 6)
12) Remove the accent piece by gently lifting up at the bottom of the accent piece and lifting towards the front of the
machine. (Figure 6)
Figure 6
"$"EBQUFS3FDFQUBDMF
/VU
4JEF$PWFS
Figure 8
"$"EBQUFS
3FDFQUJDMF
/VU
Figure 7
13) Remove side cover(s).
14) Replace side cover(s), accent piece and slide console mast boot down.
15) Replace crank disc with crank arm 180 degrees from the other side, attach crank nut and replace cap. (Figures 3 and 4)
16) Attach pedal arm to crank arm and tighten nut C and attach pedal arm cover. (Figure 3)
17) 2.2E Only-Reassemble reversing step 4. (Figure 2)
18) 1.2E Only – Reassemble reversing step 1-3. (Figure 1)
Figure 4
